Lietuviškai English По русски Latviesu
Pieteikšanās  / Reģistrēties
 
TRT-shop
Total amount of the basket 0.00 €
Home > AUTO > DZINĒJS > Dzinēja daļas pēc auto > Toyota/Lexus > name_lv
AUTO
 
  JE Pistons forged pistons for Toyota Supra 2JZGTE 3.0L 24V engines

JE Pistons forged pistons for Toyota Supra 2JZGTE 3.0L 24V engines

Ražotājs: JE Pistons
Ražotāja kods: JE-314303

Engines: 3.0 Ltr 24V
Displacement: 2997cc
Engine code: 2JZGTE
Bore: 86.00mm
Stroke: 86.00mm
Rod length: 142mm

Head: 45.00cc
OEM compression ratio: 8.5:1
Block height: 219.90mm
OEM head gasket thickness: 1.42mm

to the basket
Cena 859.00 €
 

Availability: Part is in stock.

 
Manufacturer code Bore Oversize Comp height Dome dish Deck clr. Comp. ratio Pin Weight Footnotes Cena
JE-314303 86.50mm 0.50mm 34.00mm -8.3cc 0.02- 9.5:1 22mm 334g S;T 859.00 €

Wiseco footnotes

1. Most Wiseco pistons have offset pins. Pins must be offset same as OEM for quitest operation
2. Due to a compression height may protrude above the deck, it is recommended that a 1.00mm thick head gasket is used.
3. Optional pin upgrade available
4. Utilizes extra deep valve pockets to expand the range of I-Vtec with big cams and milled heads
6. These pistons have an oil ring groove that is lower than OE. Will not work with sleeves with access hole if the oil ring is not pinned in place
A. Piston rings need to be adjusted
B. Rings need file fitment to the bore
C. Stroker kit for B25 stroker crank
D. Weight reduction possible
E. With valve pockets unlike K557M series
F. FSR series (Forged Side Relief)
G. Only with 2.5 Ltr conrods
H. Based on Volvo rod 23mm. Ford OEM 21mm.
J. Mini Tritec engine
K. Compression ratio depends on Cylinder head used
L.  Pin 20mm, OEM = 20.65mm
M. Made to order (4pcs minimum)
O. VR6 cylinder sets from stock, can be used
P. Piston guided rod, washers required
Q. Oil squirter modification or removal required or use adequate spacers
R. Full Round Skirt
S. Assymetrical FSR series
T. Accepts Turbo and Nitrous
T. Accepts E85 and Nitrous
P1. Includes 0.572cm wall pin
P2. Includes .200" wall pin
P3. 84.00mm and larger require sleeved engine block

 

Other category items
 
 
More manufacturers
Contacts Terms & conditions Payment Delivery How to buy?

Paying is possible by transfer from any bank:

swedbank seb dnb nordea paypal paysera

Any info found on website is intended for guidance purposes only. Price and availability of info is subject at our discretion to change without notice.
© 1999-2016 TANAGRA UAB. All rights reserved.